Categories

behars Loading... Please wait...

Call Us Toll Free: 1855-585-4430

Categories

left_callouts

Squeegee Assemblies for Sweepers and Scrubbers

 

Squeegee Assemblies are some of the most important components of scrubbers and sweepers because they help extend the shelf life and productivity levels of not only the squeegee in the assembly but also the scrubbers in general. One important fact to remember to extend the life of squeegee assemblies is to always disconnect the vacuum hose from the rear squeegee assembly when installing them. You have to also loosen both the squeegee mounting handles, as well as pull from the rear the squeegee assembly from the scrubber itself.

You have to check and level the rear squeegee, too. Lower the squeegee, drive the machine for several meters forward then bring the machine to a stop, and see if the squeegee deflection over the full length of this squeegee blade is secure and tight. If you see that the deflection is not the same across the entire length of the blade, then use the tilt adjustment knob to adjust it. Checking if the parts of the assembly need replacements is another important maintenance task.

Fortunately, when you want to replace the bill of materials and parts of your squeegee assembly, there are now major international brands that can cater you these parts. From squeegee kits, squeegee frames, rods, nuts, springs, rings, pins, grips, wheels, washers, flats, locks and clamps, you can all find them under this category. You have the guarantee from the manufacturers themselves that they are made of the finest quality materials that underwent strict quality standardized tests unsurpassed in its reliability.

  • PAGE
  • 1
  • 2
Next »
View As Grid List
  • PAGE
  • 1
  • 2
Next »

Back to Top