Categories

behars Loading... Please wait...

Call Us Toll Free: 1855-585-4430

Categories

left_callouts

Sweepers and Scrubbers - Pallet Jack Handle Assemblies

 

The Pallet Jack Handle Assemblies you can find in the industry today are manufactured in two main types in terms of the design of their handles. Ultimately, the dimensions and the parts for such assemblies would vary from brand to brand but one thing that is shared by all these types would be the fact that they have a release lever in the handle’s center where its frame is seen together with its handle loop. What this lever does is make sure that the unit is in either a proper lift mode, release mode or just set to neutral. You can also get the bottom of the handle of this assembly to be attached to a bracket with the help of a pump.

Another common design for a pallet jack handle assembly is shaped like a handle frame that is installed directly to the pump, with newer handles having their lower axle installed around it with an attached roller. What this roller does is that it makes contact with a cap or the washer that can be found in the assembly’s return spring. This roller moves around, compresses the spring and the piston as the handle is pumped up and down.

When this pallet jack handle assembly gives in to wear and tear, you need not worry since major international brands like Atlas Pallet and Bishamon can provide you with replacement parts. All the replacement parts for the standard pallet handle assemblies you can buy under this category are guaranteed to be made of high-quality materials tested with unsurpassed reliability.

  • PAGE
  • 1
  • 2
Next »
View As Grid List
  • PAGE
  • 1
  • 2
Next »

Back to Top